Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 22968
Filename: ahcpd_0.53-3_mipsel_mips32.ipk
Size: 23741
SHA256sum: d91850f229ba5a18bf7fef3ebcc76c13ad0c2d0bdceb88b942389db7b6a294d7
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 26811
Filename: alfred_2023.1-1_mipsel_mips32.ipk
Size: 27731
SHA256sum: 36a34c0bd063aa0c15425d2cfa94978c4fc8c43a65ec3f627320b5aa818e282f
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mipsel_mips32
Installed-Size: 3964
Filename: babel-pinger_0.1-1_mipsel_mips32.ipk
Size: 4617
SHA256sum: 9223a2000437bf9cb7d6fd87aa7ebcf9136bc92a6f2ecc7e0bb49f2c78eda875
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 63483
Filename: babeld_1.13.1-1_mipsel_mips32.ipk
Size: 64560
SHA256sum: 55b6091bf8a00bfae580797983c2cb651a2c4c97a10ec7096b1c58287c19a300
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 41662
Filename: batctl-default_2023.1-3_mipsel_mips32.ipk
Size: 42456
SHA256sum: e148c3a262168868d240ec9008920f70df155a23e75d585050e64ce28f2a3e10
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 48930
Filename: batctl-full_2023.1-3_mipsel_mips32.ipk
Size: 49542
SHA256sum: 8096cdb3b9fc2ac92fbf6128ab99ab93ea676cf90105e7b8d69df9f1a7863877
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 13590
Filename: batctl-tiny_2023.1-3_mipsel_mips32.ipk
Size: 14488
SHA256sum: 9e5e3889278ae388e17d3b7a1d856f5a62a3cad2bcccefdf7258f58d3851f80f
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 39426
Filename: batmand_1440-1_mipsel_mips32.ipk
Size: 40142
SHA256sum: 6f2ee54a9cd62217c74b5f9f924da0d6d9ac74c9f52698db8af5b094660afa51
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 6834
Filename: bird1-ipv4-uci_0.3-5_mipsel_mips32.ipk
Size: 7869
SHA256sum: 9653bba9bd07710d85dc904d5dfb038d2d84fba05e86b9b0c252b2b67e709e76
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 209919
Filename: bird1-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 210521
SHA256sum: c5cd484ddcf373835859dc4d446c2afb7000e486edf0816bcec13d174c7ea73f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 6003
Filename: bird1-ipv6-uci_0.3-5_mipsel_mips32.ipk
Size: 6968
SHA256sum: c941cc1fb16ebc1b9a0d3b7dfa3f040d54d496abd6859bd520ebacf217de733f
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 241266
Filename: bird1-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 242017
SHA256sum: 4ba8e44f77a49e4e20810262337dc824d1364504ea190cc044a54caea8097ba6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8878
Filename: bird1c-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 9970
SHA256sum: 48e942afc0fe52384ef78b6ac504561573f34eb782e63e8371b326de4b378543
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8934
Filename: bird1c-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 10029
SHA256sum: 4e39272279816d5d3e4282d281ddcda7e5ed62962f67f7f7e82abd185a899e79
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8297
Filename: bird1cl-ipv4_1.6.8-2_mipsel_mips32.ipk
Size: 9293
SHA256sum: 202fa96bd7059c85319449b40ce5f43cd52993a217192c9d795e0584ba6d889b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 8377
Filename: bird1cl-ipv6_1.6.8-2_mipsel_mips32.ipk
Size: 9376
SHA256sum: cedc06c906a3cde7b4ba6bbfe77ca3c06cd0b888c5295341bc8c031f80f64ce2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 396913
Filename: bird2_2.15.1-1_mipsel_mips32.ipk
Size: 395565
SHA256sum: 77078da078f583ab22640aff78de62c4ec723757d35ae5a11ba42ede3537b663
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 9569
Filename: bird2c_2.15.1-1_mipsel_mips32.ipk
Size: 10524
SHA256sum: 26c3cc697ad896349230ccbd32a5e371f0a83abe92d26d5b51fafcef4c7ca09d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8313
Filename: bird2cl_2.15.1-1_mipsel_mips32.ipk
Size: 9204
SHA256sum: c307ed1dd7eaa1ae57bbf35d2f5eba7500ac0da8627cc5981397214dcdae4800
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 4027
Filename: bmx7-iwinfo_7.1.1-5_mipsel_mips32.ipk
Size: 4651
SHA256sum: 02bc7eb88587edf1ad213b9636b29f9d8f83b88eaa654a15b671fb0dbeb3ca36
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 7961
Filename: bmx7-json_7.1.1-5_mipsel_mips32.ipk
Size: 8643
SHA256sum: 7cce0ec74fa7fbfe0c5c2d0ed02bd413c66e7155d927f5ee9aa0750221547d11
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5528
Filename: bmx7-sms_7.1.1-5_mipsel_mips32.ipk
Size: 6087
SHA256sum: 62c4c94dc9fec1aa0a2576f953d37f2f2fdcf854c0a2348eb2c1cb068a60427c
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 9497
Filename: bmx7-table_7.1.1-5_mipsel_mips32.ipk
Size: 10150
SHA256sum: 66b076ed228759bcafb6104643103181d73047d8e93acf418800510964aa20c7
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5094
Filename: bmx7-topology_7.1.1-5_mipsel_mips32.ipk
Size: 5665
SHA256sum: e9b12995735e8afaef1c998e1cfe0c334880b5106a0b3f86f2fa0361af81813b
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 25335
Filename: bmx7-tun_7.1.1-5_mipsel_mips32.ipk
Size: 25952
SHA256sum: c44347ade4f305d8462753a15a14e532ade2003785b09f3b5b334480bc162fd3
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8096
Filename: bmx7-uci-config_7.1.1-5_mipsel_mips32.ipk
Size: 8830
SHA256sum: 6750774ea0e9f9a734832b2d79b9ac7a9cbd0ba374760d79eaac84454096612a
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 178235
Filename: bmx7_7.1.1-5_mipsel_mips32.ipk
Size: 178718
SHA256sum: d8fd174a90ffbb8b80370c638a5734f33c84ad63e1c107c9c5a62d504e136ddf
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 379043
Filename: cjdns-tests_v21.1-4_mipsel_mips32.ipk
Size: 378865
SHA256sum: cd9ccd064fe30befb8ecf1ac9469b0238fe1ecdabd02f1cdbd3ad29e859bc0da
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 456670
Filename: cjdns_v21.1-4_mipsel_mips32.ipk
Size: 456510
SHA256sum: 0476d8d2bc8e7298ded1bea69b093b021ccd7c18f68ad1cb5fb339853c167ba6
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 1393
SHA256sum: 8587292a351e448c24b273af40d00b9954d72fc2fc3ab786f05fc1572d79b247
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 96
Filename: hnet-full-secure_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 932
SHA256sum: 7e35c3ad3521dfb66172607b503fe36cd81f71b7bbd516872700aa040b1e241a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 96
Filename: hnet-full_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 916
SHA256sum: 8eab8896c2fa6bd3cc839b19428bfdbea929a000e5691f0305f6d6af319f3fdc
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 96385
Filename: hnetd-nossl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 97302
SHA256sum: d76e923d4297086ec2971765fe5aaaf9a859fc0a32f7b1e5b424ae867eb87133
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 106707
Filename: hnetd-openssl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 107443
SHA256sum: 6bd6518dda8a890db1b3be85b7fea312ac067b9259773093c613d0fe129c7a6b
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 7425
Filename: luci-app-bird1-ipv4_0.3-5_mipsel_mips32.ipk
Size: 8242
SHA256sum: ca295a873b4b138b72e03755f00963cdb2d93c250239db02c0f07a3b44a63ce0
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 7469
Filename: luci-app-bird1-ipv6_0.3-5_mipsel_mips32.ipk
Size: 8284
SHA256sum: b7f8a2d01a5653ab497631aacdf5e23564447e0074407db9f1fb3fa486b5a351
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mipsel_mips32.ipk
Size: 6557
SHA256sum: 9e891edc4c9e4613b7395bd56f2cad1ac447ff0e0a51e5d309bda9c32e0fc87c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 56779
Filename: luci-app-hnet_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 57617
SHA256sum: a6f744a08659e27ed82036392984ca1d4afed505a8996012e50f60eb24cec262
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6976
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7853
SHA256sum: fb0d0a47a3a52a65488cb67e0ec8912d81d091d815821dbca3bbc38654dfb31e
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 119310
Filename: mcproxy_2017-08-24-93b5ace4-9_mipsel_mips32.ipk
Size: 119983
SHA256sum: 29f89b37d10cacaa1eaf024f1e0051fe479513056749013532592e38b97aeb91
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24095
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25645
SHA256sum: c8dfe6abfd64dc2c5242a006fcf2ca3c0545a52f268911d4b5b506cd3a968a1c
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6584
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mipsel_mips32.ipk
Size: 7572
SHA256sum: f6b154f6fed39a05b28e24076377c6cbd003417a3cd2f452e1cf584b231d95f4
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2850
SHA256sum: ab3e1af5442c6113f388f498f7e18db85acd55fcfb87369a238356dd97b3888f
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 30602
Filename: ndppd_0.2.5-2_mipsel_mips32.ipk
Size: 31152
SHA256sum: 404a0aa1eddbdf33b9e551843831abdd3a6464ae48aca75407fbbf5fcb3d5141
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 45617
Filename: nodogsplash_5.0.2-1_mipsel_mips32.ipk
Size: 46048
SHA256sum: 9a050a70a4e9267967567b91fcd14fa3d8db8634457a0e81aac20f5c319592ee
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 11302
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 11986
SHA256sum: 094556d4458adf65171fdd406a5a7ef939597162d734247f196a4514bb1667ad
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2039
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2700
SHA256sum: b8be7bf5e3b8e61d7304159b244f01bb5f8e107b49c9533af1441a432f59a0f9
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 12053
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 12794
SHA256sum: 083bb1f7750ae0d0325e61b99a9a1e8822acff9332e5716f37fc9691268dab2f
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 3821
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4425
SHA256sum: 8f9cef4828a8843cfb65537adfa48cb9685dc2f652d37da413fff339dc6348a8
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2399
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3039
SHA256sum: 23d792e8eb8790b942b8a2eea37160f66036e743e2dcbd0c6097f7ecfa0f696f
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4229
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4829
SHA256sum: ea9d3f5ad37370cbae18df6b2e863f6e260689112fb4c8edc079928459874ea2
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2578
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3202
SHA256sum: 1c8f070df5814eda1ff727e52a8b0bbe3a5fbc2219d333a05e5e0a422df867fb
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 31158
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 31684
SHA256sum: e139ff1640dd2071ff48796199a37cefe7b53f6b4cc55ba2c644397be4c89cbf
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 23024
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 23715
SHA256sum: 5b6ede1608d228c9d6236f2e4614e94bb71e166b14f5f4432a965da3516579e1
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8883
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9539
SHA256sum: e77fae0342dd89aa0711a8c7f0cf9590ffd9afeb13e420ba46117e5d9b7d6895
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 11324
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11945
SHA256sum: 6ac928c3c4fa3b09ed2b4f689624ee5eb108b0d1e6c282a257e9b509da18f50f
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 13354
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 13959
SHA256sum: d99a7a7cbf7caae503b8334638569943bda2bc67d2ad3502eecf5f4633c37c54
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8541
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9196
SHA256sum: f044814498870fac49a6306741066743fcde8bbc09c59071b6bee7da1cfc2e8d
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2950
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3581
SHA256sum: dfe1c247d008672d4665a6752737167c647a84ba416d0c0eea0eb7fa74d53417
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 62455
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 63109
SHA256sum: dd8bdd524907ca960e9639de253c8881ad27b3f44640f1df26f22ed2d279103d
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6211
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 6934
SHA256sum: d1ae23e579486ba069291bb64023c91be4783622068d5bb6617dc25947923fd6
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 10358
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11022
SHA256sum: 7bc0a79b98a2beeed427ac9f44abf7aaa008423f9f0a4552da4a001f9e9c0ca9
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4517
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 5170
SHA256sum: 42868a7fa92eac1ee2045728b91eea3e680613c745f42b9816407ea5dd89abb0
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 15147
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 15732
SHA256sum: be8760b88acb1f38bdc0e549ca5363c137fc162f10072b83bca94e45c80b46c3
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1714
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2380
SHA256sum: 85c9982f560893c4a75787e364a97863466f28fbc0be77f13eb3aef820a89342
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1181
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 1931
SHA256sum: 72092aa10bab021196f4840aaf3e170dcce9ecaed45ee6de26f8c7f4156a04a7
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 139616
Filename: olsrd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 140351
SHA256sum: e819a5a427d43763e93f18764a5f8987c185fc08f88837e1669ecae4830b9d6a
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 159961
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 160465
SHA256sum: 286bdad766a533435f9ed6adcd346b3b038236d930987ed5ee3cef6d216f2f0b
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 155977
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 156564
SHA256sum: 1cf252fdb9cbe488772d55aeacbdaedac80608796e96273efaf743b632311c3c
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mipsel_mips32
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2279
SHA256sum: a7fb90b2009c223e4ce7d055ce9331042e227117c9c0009bbd57db7dfff9fbd8
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 232377
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mipsel_mips32.ipk
Size: 232732
SHA256sum: 9d9bb83a8af67f93fec8986960cbf5215b36d05d2436cba124e29498625f3c00
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 159724
Filename: opennds_10.3.0-1_mipsel_mips32.ipk
Size: 158960
SHA256sum: 5c4e5762a283bf163e693f04fd031955f55af999013059092b9414ed43d34aee
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 79023
Filename: pimbd_2018-06-19-dbf4e591-4_mipsel_mips32.ipk
Size: 79838
SHA256sum: 0b7abc9991cea9ef7c6924cae92a206efa998c5a3a35514caf5ada167c29a5b3
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 33344
Filename: prince_0.4-3_mipsel_mips32.ipk
Size: 33985
SHA256sum: 4d51fedb0789ab4db97644bb84010d77938808b6f26b5b780d09f9b4bb316c7e
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 202463
Filename: quagga-bgpd_1.2.4-2_mipsel_mips32.ipk
Size: 201507
SHA256sum: 4436edfce5e51d2f8f152d777d26c5654860f3bd83c89a7051b437776805a5fc
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 90097
Filename: quagga-isisd_1.2.4-2_mipsel_mips32.ipk
Size: 90564
SHA256sum: 1f7184ea6b7a776479d00e0ce448406e82e17518640977b3c937686a52f02bca
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 181035
Filename: quagga-libospf_1.2.4-2_mipsel_mips32.ipk
Size: 180873
SHA256sum: c5e065b78fc6926b991a8fcd839d3decb78285f97bf24674f72854c6fe8c1422
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 128980
Filename: quagga-libzebra_1.2.4-2_mipsel_mips32.ipk
Size: 128778
SHA256sum: 4b45111ca873b811dcf7626a86b5e3b7cd5ac1f4d1702d5242ab1f651d43a3f1
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 85707
Filename: quagga-ospf6d_1.2.4-2_mipsel_mips32.ipk
Size: 85912
SHA256sum: 4b7fea1469ddc35fcf94cd6a8fd02a72f96a426f96e008b6578b9548c59de7af
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 3766
Filename: quagga-ospfd_1.2.4-2_mipsel_mips32.ipk
Size: 4406
SHA256sum: 8518852cba001220c76f7a43c3b3f2f9bac33eb43d63f2091f3d2d190ad67fa5
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 35169
Filename: quagga-ripd_1.2.4-2_mipsel_mips32.ipk
Size: 35390
SHA256sum: bc92f8967e3def39674cbe02bbb311d4327a9bc2e13254154a42974411e45072
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 29361
Filename: quagga-ripngd_1.2.4-2_mipsel_mips32.ipk
Size: 29877
SHA256sum: a03e140bb97e6f5e0f8a6584208f9cbb0d07de42d324e2bdaceba663f865e8ea
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 129635
Filename: quagga-vtysh_1.2.4-2_mipsel_mips32.ipk
Size: 130055
SHA256sum: e7672e3b0c6d847c881108ba8d53be1f2bdf4655866c9e1f0ea549ce2e67d382
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 11507
Filename: quagga-watchquagga_1.2.4-2_mipsel_mips32.ipk
Size: 12129
SHA256sum: 3177f27128d2d84c33913058f9b225cb26cf302a07f309838c4d3e6ab2b5f387
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 87136
Filename: quagga-zebra_1.2.4-2_mipsel_mips32.ipk
Size: 87291
SHA256sum: 969a1ee34649f2316971be231a3ccc9287a5908ca1e7cb9615d939b5d9e04782
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 2383
Filename: quagga_1.2.4-2_mipsel_mips32.ipk
Size: 3201
SHA256sum: 26f1ba99916f721d59f8ad29b3c5d3142a8542d2a1f7f91e676d9a24ee3736a2
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 10458
Filename: vis_2013-04-07-7710cce4-9_mipsel_mips32.ipk
Size: 11121
SHA256sum: b15f6054bbd036c72f0c0c3ff426b1b923d74b93170f32b5c86b8753397b79ce
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 9131
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 9803
SHA256sum: ecb90fbe4d56b77f2b31816ee887f6cecc55ffdf93ebea05a590b0da23d20b6d
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.