Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 21759
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 22582
SHA256sum: 7a6c621128e4556f285a6e652dbdc7529fb6c39d69ccd6bad22b0f52a5c395d8
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2019.2-3
Depends: libc, libnl-tiny1, librt
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 26632
Filename: alfred_2019.2-3_mips_mips32.ipk
Size: 27583
SHA256sum: 10379bd99b77bdc3199a1754424ac7fa4e2f0224abfa44e7f3c23074a936994c
Description:  alfred is a user space daemon for distributing arbitrary local information over
 the mesh/network in a decentralized fashion. This data can be anything which
 appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3874
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4661
SHA256sum: 570fcdb726094886bb4cca3147f9bf2659ae0a4ba84a02227639c8fa1a36ab64
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.2-1
Depends: libc
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 55563
Filename: babeld_1.9.2-1_mips_mips32.ipk
Size: 56628
SHA256sum: e7729569d8aeb32384ed38c0fc7668df45b5e614aa2720582a29939a1fee734a
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 40846
Filename: batctl-default_2019.2-8_mips_mips32.ipk
Size: 41431
SHA256sum: d8cb03d8efb6fa3f73b33a4e6fb831905b9acf505749c2956a9e83aaa0c2cfce
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 48412
Filename: batctl-full_2019.2-8_mips_mips32.ipk
Size: 48960
SHA256sum: d7d057f161a28b83b32ede38b37a5f65b62198b2a2bd64bf65dd32bf891a4f52
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2019.2-8
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 15160
Filename: batctl-tiny_2019.2-8_mips_mips32.ipk
Size: 16041
SHA256sum: 15093b160743bcc17b63fa0f18247a0d395f11d753f546794c3e085e563182d9
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-0
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 38003
Filename: batmand_1440-0_mips_mips32.ipk
Size: 38722
SHA256sum: 8ea3c238eee3f35e59c8b841b0f47b3f51b0568a179badad959a737b3ddeb763
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 6740
Filename: bird1-ipv4-uci_0.3-1_mips_mips32.ipk
Size: 7748
SHA256sum: 3ee5521028e57a9a8127dffa365b69fd96f7b34083ba56951d5903a0b079c299
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 207451
Filename: bird1-ipv4_1.6.6-1_mips_mips32.ipk
Size: 208435
SHA256sum: d346aff7788f82e8272e93f21318c8385ee2598c55dcc08fb9b2b1732445eff9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 5902
Filename: bird1-ipv6-uci_0.3-1_mips_mips32.ipk
Size: 6836
SHA256sum: 879eaed2525f9d26c52545210995d8e0ec2b42e49051552ff2049545bcbadb62
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 238862
Filename: bird1-ipv6_1.6.6-1_mips_mips32.ipk
Size: 239663
SHA256sum: 67142abc1e4170a7012ba03551915c73cb389ac4e79bcd635e20958d70043ffb
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8986
Filename: bird1c-ipv4_1.6.6-1_mips_mips32.ipk
Size: 10214
SHA256sum: 8e69998d5a6bf32efe7ff404892f73766641d06fb94a423c25555a56793b685c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9046
Filename: bird1c-ipv6_1.6.6-1_mips_mips32.ipk
Size: 10275
SHA256sum: 866b3c76c16c61f99e49ab0d387b2e7f53a23add8014ea4ad6a5bb8252d76f44
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.6-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8342
Filename: bird1cl-ipv4_1.6.6-1_mips_mips32.ipk
Size: 9497
SHA256sum: 7bd5d553e7c2ce504e589deef36739f17a2b74141295bf03a606be29e037a293
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.6-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8418
Filename: bird1cl-ipv6_1.6.6-1_mips_mips32.ipk
Size: 9576
SHA256sum: 1bd9561f53dbd8b3ea9632d4f9705b88eb08dc3e13c47552cee874153afd0fca
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.10-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 363570
Filename: bird2_2.0.10-1_mips_mips32.ipk
Size: 362751
SHA256sum: faeb67678a6a0ba1d18b18b5a05dfb871afc40628289b9ade92758fc16dba039
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.10-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8781
Filename: bird2c_2.0.10-1_mips_mips32.ipk
Size: 9904
SHA256sum: 83840df98309b059fef4dacf32b8559b77b1044a9a197bb6219695bf423f90db
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.10-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7616
Filename: bird2cl_2.0.10-1_mips_mips32.ipk
Size: 8659
SHA256sum: 031daae96aae0c6504798628005128e22c0bad66e5f01f707d34f3b65d73eb14
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c5
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 6427
Filename: bmx6-json_r2018020902-5_mips_mips32.ipk
Size: 7222
SHA256sum: 371f41588d39872ddf6e5459f73d14a975ceaad2201c0201204553c70ee7f333
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5134
Filename: bmx6-sms_r2018020902-5_mips_mips32.ipk
Size: 5847
SHA256sum: fd32c53d4bf8eec5187380cb47717405b367970b223eb4522929c6f469e24d4d
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8602
Filename: bmx6-table_r2018020902-5_mips_mips32.ipk
Size: 9369
SHA256sum: ff8a5d31c2495bb8b2de86c9b2f0ad48d414e16c2226516d38ceb42f2733fed0
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8532
Filename: bmx6-uci-config_r2018020902-5_mips_mips32.ipk
Size: 9360
SHA256sum: aa4721e97a0d503873a2325139595e101e5f00932faa00e82ef85473274ced82
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 145284
Filename: bmx6_r2018020902-5_mips_mips32.ipk
Size: 145898
SHA256sum: a43be06331cf7546913fb46d0592edc728bdc810e734f92bfd76d18876e7c5f4
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: r2019030802-1
Depends: libc, bmx7, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 4061
Filename: bmx7-iwinfo_r2019030802-1_mips_mips32.ipk
Size: 4822
SHA256sum: 3cf83ba4274e9bbe68ca073d005a05de9b95e665b11bbea744601702842a487c
Description:  link characteristics plugin based on libiwinfo (recommended!)

Package: bmx7-json
Version: r2019030802-1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 7961
Filename: bmx7-json_r2019030802-1_mips_mips32.ipk
Size: 8742
SHA256sum: 8971361a01d8c5eeae54535f88653c106de7189429446b7d15ae5260ca2b6c81
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5598
Filename: bmx7-sms_r2019030802-1_mips_mips32.ipk
Size: 6342
SHA256sum: ef2de0f02115c92489e11af7afe981c6699146ddc0961d60a4e8932a6e7f7346
Description:  sms plugin

Package: bmx7-table
Version: r2019030802-1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9636
Filename: bmx7-table_r2019030802-1_mips_mips32.ipk
Size: 10404
SHA256sum: c4c4e111873a1d1d8e597ff82fcb72085bd7b80c66770cc6b4f3764a1cfcbf76
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 5108
Filename: bmx7-topology_r2019030802-1_mips_mips32.ipk
Size: 5833
SHA256sum: 29f90a7a29157edcb239a82e5933ab996bb2a3fbfdc8024bc4cfb5c6d752d044
Description:  topology plugin

Package: bmx7-tun
Version: r2019030802-1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 25682
Filename: bmx7-tun_r2019030802-1_mips_mips32.ipk
Size: 26375
SHA256sum: f665741501273613de5a3c0a16f701ba08055ff4b416905c294a0989673d290a
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2019030802-1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8213
Filename: bmx7-uci-config_r2019030802-1_mips_mips32.ipk
Size: 9055
SHA256sum: f3a7884534420eaeee63c32365efb91372e2389bef9ea4fc7e5232b3477b71fb
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2019030802-1
Depends: libc, zlib, libmbedtls12, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 176679
Filename: bmx7_r2019030802-1_mips_mips32.ipk
Size: 177319
SHA256sum: 4824799fe4598a71cb066baca33444b0c22b172f7c169c4ac8641c1b058e067b
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 20.2-1
Depends: libc, libpthread, librt
License: GPL-3.0
Section: net
Architecture: mips_mips32
Installed-Size: 331815
Filename: cjdns-tests_20.2-1_mips_mips32.ipk
Size: 331292
SHA256sum: 8c43c4b9629e5c990c13a3c0a1f90b01fbb104e9cfe8c7c41754ff7a1c4d2aff
Description:  cjdns test cases

Package: cjdns
Version: 20.2-1
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0
Section: net
Architecture: mips_mips32
Installed-Size: 431998
Filename: cjdns_20.2-1_mips_mips32.ipk
Size: 431988
SHA256sum: 2b2619e3d27f579d1771eeb826453b49dc5665a044b2674d122f04fee449c723
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 551
Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 1424
SHA256sum: 86ca6dc95e6968e9651f7781ba5fe72faa7bc38e8fe6363a1eb57ca214954601
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 105
Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 960
SHA256sum: 05ff2b0551ffce4a3c99af2276d724298c56c36769eb9d837ed1fa0d67c4f98a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 105
Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 942
SHA256sum: c9faea867981f8ead01d51910d25a46c4bcada742dab2f9a12efe690e6f9fb37
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 95877
Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 96465
SHA256sum: ff2c303545d8df8f4167b55f6d3e2c87a54396d34115113797114d387c7a6228
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 106124
Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 106179
SHA256sum: 20b8c2b0cb6060740bd990ee3a9960c7e9fcb28d3aafb5cec5e4c048e9b4e29f
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-1
Depends: libc, bird1-ipv4-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 7429
Filename: luci-app-bird1-ipv4_0.3-1_mips_mips32.ipk
Size: 8237
SHA256sum: af7190c819f36c83aa8e7f229be27ed41fc07c49fb65a195b4e68ff60defe225
Description:  bird4 application for LuCI

Package: luci-app-bird1-ipv6
Version: 0.3-1
Depends: libc, bird1-ipv6-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 7470
Filename: luci-app-bird1-ipv6_0.3-1_mips_mips32.ipk
Size: 8275
SHA256sum: df2aef9976d850fd46849668f2b5757f738b56c10fe46c92c24801f3f6eb2fbb
Description:  bird6 application for LuCI

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 30308
Filename: luci-app-bmx6_6_mips_mips32.ipk
Size: 31134
SHA256sum: 38110dd11b3bbe5ddf92cf88f110b285c9388fe41897018e44fbd392a1d21b14
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-bmx7
Version: 0.1-alpha
Depends: libc, luci-lib-json, luci-mod-admin-full, bmx7, bmx7-json
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 21808
Filename: luci-app-bmx7_0.1-alpha_mips_mips32.ipk
Size: 22679
SHA256sum: 7102b25cd970ae92a9b1c4826f014f4a88ca8eb093848f9d8a4b569d68001883
Description:  LuCI application for web-based configuration and visualization of the BMX7 routing daemon

Package: luci-app-cjdns
Version: 1.3-6
Depends: libc, cjdns, luci-base
License: GPL-3.0
Section: luci
Architecture: mips_mips32
Installed-Size: 5376
Filename: luci-app-cjdns_1.3-6_mips_mips32.ipk
Size: 6327
SHA256sum: 1cfdb08c7a57a819897e04988bc6d6cb2fd5c22c17e721857ea20a0c9905e2b6
Description:  This package allows you to configure and inspect cjdns networking using LuCI.
 
 Cjdns implements an encrypted IPv6 network using public-key cryptography
 for address allocation and a distributed hash table for routing.
 This provides near-zero-configuration networking, and prevents many
 of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc
License: GPL-2.0
Section: luci
Architecture: mips_mips32
Installed-Size: 56787
Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_mips_mips32.ipk
Size: 57653
SHA256sum: 1b271338dad6cf2de1db3b72e323050b345ff197040f31710583e10ee123e337
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 23291
Filename: luci-lib-dracula_6_mips_mips32.ipk
Size: 24018
SHA256sum: 77efe95ba3ef9c35cc48e91480b65284d7e287b9001b53eca8e4060d73114b1f
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: mips_mips32
Installed-Size: 24826
Filename: luci-lib-jquery-1-4_6_mips_mips32.ipk
Size: 25566
SHA256sum: f6b2801eeb1c443cf356c60980cd928ba9245bc967d9ac22270f0f8f0c0f7008
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 116001
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_mips_mips32.ipk
Size: 116597
SHA256sum: 5f1e48cb446b21e96a5e4f9cdfdcbdd840760c3164d3994928d870d544bdfbb6
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 6331
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_mips_mips32.ipk
Size: 7423
SHA256sum: a8d96726e68c3109ab0232c34b9a63cd9f327d1ada5a1ccc2ae0ad804de3550b
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 279210
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_mips_mips32.ipk
Size: 279995
SHA256sum: 365384c36467443829daa84f9752e39ee873d18b2481ca88a38320b738e93cb1
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, libstdcpp6
License: GPL-3.0+
Section: net
Architecture: mips_mips32
Installed-Size: 29673
Filename: ndppd_0.2.5-1_mips_mips32.ipk
Size: 30447
SHA256sum: 3f8677f775fb516c1e6f2268cb3f161666db1edc9aeb3e40e4e227adb458f2b8
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.0.3-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 56737
Filename: nodogsplash_4.0.3-1_mips_mips32.ipk
Size: 57488
SHA256sum: 80d623d4504da4bf50fae5a153b3c8044b4cefa672e2323b764264141ae7e346
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 12090
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_mips_mips32.ipk
Size: 12912
SHA256sum: e6827d6c73d6197f6f9a888d76b56f44b18a6aea606c927231c4c5d3ad079ce3
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1391
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2141
SHA256sum: e8f2fa5d7bc1917e743ca4653c5886bb495fb1351b0de1ef1ae29e0845842062
Description:  Common OONF startup scripts

Package: opennds
Version: 5.2.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash, nodogsplash2
License: GPL-2.0+
Section: net
Architecture: mips_mips32
Installed-Size: 82225
Filename: opennds_5.2.0-1_mips_mips32.ipk
Size: 82821
SHA256sum: 039c1449397f4b33a387465a83ac1232f19d2d6719f600c6f907076f4eac48e5
Description:  openNDS is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78960
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_mips_mips32.ipk
Size: 79761
SHA256sum: 93968c9e60f1aaee70a66521561d70f9a21dfbc87154617871f8d31ae4bf206e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 28423
Filename: prince_v0.4-1_mips_mips32.ipk
Size: 29338
SHA256sum: c06c292e7e542837c887ea7423a1075e44759d2a3db1f70d7a30f050a90fd9ac
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 196399
Filename: quagga-bgpd_1.1.1-1_mips_mips32.ipk
Size: 194727
SHA256sum: fa82b6c6fec51175e74ad8cdaeb3d86b37c63586a6865fe51df6096878659037
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 90296
Filename: quagga-isisd_1.1.1-1_mips_mips32.ipk
Size: 90211
SHA256sum: 6d4c9a3748ff4e8332bafd78a6aa9c838d8bce2a8d02859a6e174ac310db6cdb
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 180891
Filename: quagga-libospf_1.1.1-1_mips_mips32.ipk
Size: 180416
SHA256sum: 9fc0784a8d69ac1adb025b9987d09ae320fa239d8db4bf4fec066b00a0c7901e
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.1-1
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 128730
Filename: quagga-libzebra_1.1.1-1_mips_mips32.ipk
Size: 127959
SHA256sum: f9940dc764c87e6104e0032d3c1dd58dad4d7c04458c931862c6a8da59360e07
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 84206
Filename: quagga-ospf6d_1.1.1-1_mips_mips32.ipk
Size: 84397
SHA256sum: ae7e9d9971eb56a55d6d468e31d253eafd5da04860fd71db548d4ad52a646695
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 3770
Filename: quagga-ospfd_1.1.1-1_mips_mips32.ipk
Size: 4567
SHA256sum: 047749ec5a5a5e74a6fe829465847e23a78966e5cae123ffea48f7cbb9ed6693
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 35300
Filename: quagga-ripd_1.1.1-1_mips_mips32.ipk
Size: 35492
SHA256sum: 122c20342b4821fd7a6c6f74c623653677072af5d3f447ca2284afed9f978bb3
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 29448
Filename: quagga-ripngd_1.1.1-1_mips_mips32.ipk
Size: 29676
SHA256sum: 628daf60ab22cb43a04295fcf7c294f75255d997634eb97c5b8deb624411c622
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 125391
Filename: quagga-vtysh_1.1.1-1_mips_mips32.ipk
Size: 125428
SHA256sum: 6acc8874d6b596fcf169bfdba6e83863466e8f52b6318d7bdfb87636617825b7
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 11471
Filename: quagga-watchquagga_1.1.1-1_mips_mips32.ipk
Size: 12225
SHA256sum: 1bba6956fbad8ee8a4684baffe65d41e99faf218015c48dfcca4f95c17a112a4
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 87826
Filename: quagga-zebra_1.1.1-1_mips_mips32.ipk
Size: 87399
SHA256sum: d4542fb0b19180c06200d6a1c2114279d9274a02def5c72ed24b0ce986417cfa
Description:  Zebra daemon

Package: quagga
Version: 1.1.1-1
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 2389
Filename: quagga_1.1.1-1_mips_mips32.ipk
Size: 3234
SHA256sum: e8337688e46279b4e2b4c5508159dc64f4a35f6eb19d1e62bdd3eab87484331f
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-0
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 10111
Filename: vis_1440-0_mips_mips32.ipk
Size: 10913
SHA256sum: 6af3015fc785963dcfea3b692697bf232a00d85ee2379f3477488d7a81c50a67
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 10101
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_mips_mips32.ipk
Size: 10955
SHA256sum: 62b0c759470df6a83d39946d2d82b5d566a04c24aee34a79d62799e42942927b
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.